| General Operation: |
Step 1: Place power supply unit on a stable, flat surface. Plug power cord into wall socket. Plug Cage Water Module RCA connection cord into Line Out (2).
Step 2: Prepare bathing container. Use plastic 20-quart container or full bathtub. Fill with regular tap water and adjust temperature according to preference. Dissolve ¼ Teaspoon Sea Salt into footbath container – up to Two Tablespoons Sea Salt in full bath. Salt may be adjusted accordingly depending on water quality and quantity - use just a pinch to several tablespoons for larger quantities of water. Follow instructions on Solar Evaporated Sea Salt Crystals provided with unit.
Step 3: Place Cage Water Module into container or full bathtub. Submerge Cage fully underwater. Do not touch Cage Water Module after the power is turned on, during session or while bubbling.
Step 4: Turn Power Switch (1) on. Spa unit will begin to purify bathing water of impurities - allow to purify for a minute if so desired. Position feet or body comfortably into container or full bathtub. Relax & Enjoy! – Let IntelliVOLT® monitor & regulate your session.
Step 5: Time your own length of session. Enjoy bathing for as little as 8 minutes and up to 35 minutes. More is not necessarily better. See “General Use” for bathing options.
Step 6: When session is over turn off Power Switch (1). Unplug Cage Module RCA cord from line out (2). Rinse Cage water Module, air dry. Every 3-5 uses, spray Cage Module with Lime-Away® or other like product or white vinegar.
| TROUBLESHOOTING: |
UNIT DOES NOT TURN ON
| Check wall plug for proper connection and reset | ||
| Check if RCA cord for Cage Water Module is securely connected to Line Out jack. | ||
| Turn power switch on -indicated by yellow light. | ||
| Clean Cage Module and/or add Sea Salt. | ||
| If unit does not work after troubleshooting call customer service or your sales representative for assistance |
WATER MODULE IS NOT BUBBLING
| Check power supply connections-is yellow light on? | ||
| Check if RCA Cage Module cord is securely connected to Line Out jack. | ||
| Add up to 2 tablespoons unprocessed Sea Salt, or Kosher salt to water and dissolve. Do not use iodized salt. | ||
| Clean Cage with LimeAway® product & air dry. |
 | If water module does not bubble after troubleshooting, call customer service or your sales representative for assistance |
| LIMITED WARRANTY: |
A limited one-year warranty on repair parts and/or service of power supply control unit, excluding normal wear and tear, misuse or tampering. Accessory parts and water module are covered under warranty if found to be faulty or poorly assembled, excluding normal wear and tear, misuse, dropping, ill-maintenance or tampering. A limited 30 day warranty is in effect on repair, parts and/or service of power supply control unit, excluding normal wear and tear, misuse or tampering, whereby Pure-Charge Technologies pays for shipping in both directions dependent on repair diagnosis. After 30 days and up to 1 year after purchase, the limited warranty is in effect on repair, parts and/or service of power supply control unit, excluding normal wear and tear, misuse or tampering, whereby customer pays for shipping in at least one direction, possibly both directions depending on repair diagnosis. Repair diagnosis is conducted by authorized Pure-Charge Technologies repair technician ONLY and repairs are deemed covered or not covered at the discretion of said technician. "Not covered by warranty" repairs are done at the expense of the customer, who after repair diagnosis will be notified of said repairs, parts & labor charges. Please contact Customer Service for a Repair Order and authorization number.
CHECKOUT